MI-24T 2.4 GHz Digital Stereo Transmitter
*The product images and specifications shown on our website may differ from the actual products due to different versions.
ISM
2.4
OLED
- Equipped with a graphic OLED, a rotary knob, an ACT™ sync button, an audio input set button, and the industry’s first LED indicators for clear identification of the input volume to prevent the loudest peaks.
- Ø 3.5 mm and Ø 6.3 mm dual earphone monitoring connectors and individual volume controls.
- The rear panel is equipped with two XLR and Ø 6.3 mm input combo jacks, two Ø 6.3 mm phone jack loop outputs, an ACT-BUS networking interface, TNC RF output connectors, and a DC 12 V power supply.
- Delivers < 25 mW output power (the maximum value depends on the telecom regulations of different countries) with an ON / OFF switch.
- Presets several interference-free channels, and can ACT™ sync to the receiver.
- With a high dynamic range stereo input combo jack, it can sustain the maximum output from any mixer.
Product Introduction
Model | MI-24T |
---|---|
Name | 2.4 GHz Digital Stereo Transmitter |
Chassis | EIA standard half-rack (9.5”) metal case with a rotary control knob |
Display | Graphic OLED displays all functions and settings. The volume indicators for easily identifying the input volume so as to make proper status adjustment. |
Frequency Band | ISM 2.4 GHz |
Preset Channels | Presets 8 channels. 64 ID codes are allowed to be set for each channel to prevent the same channel from being interfered within the same field |
Channel Setting | ACT™ sync |
Audio Sampling | 48 kHz / 24-bit |
RF Power Output | < 10 mW (CE compliance) or country dependent |
Audio Input | 2 × XLR / 6.3 mm TRS combo socket |
Audio Output | 2 × 6.3 mm TRS (Loop Out) |
Earphone Output | 1 × 6.3 mm and 1 × 3.5 mm TRS with volume control |
Networking Interface | 2 × RJ-11 ACT-BUS |
Power Supply | DC 12 – 15 V, AC 100 – 240 V |
Dimensions | 210 × 44 × 91 mm (W × H × D) |
Weight | Approx. 580 g |